It’s a virtual party today with 25+ bloggers sharing their diy holiday stocking posts! Come see all the inspiration and you’ll want to make a stocking post for yourself.
My version of the stocking post is a classic wood post with peg knobs and a chalkboard sign up top for my kids. All the details on how to make my version are down below but first please be sure to stop by these blogger friends of mine to see their beautiful stocking posts!
Amazing how each blogger can make one project so different and unique!
If you want to learn how to build the basic stocking post don’t forget to sign up for The Home Depot DIY Workshop next Saturday, November 19th at 10am. Click here to find the store nearest to you offering the workshop.
I took the basic stocking post, added wood dowel peg hooks with simple wood knobs on the ends and hung our swiss cross stockings:
And now I’m thinking after the holidays I might just move this post up to my son’s bedroom to hang all his hoodies and zips!
But for now this stocking post fits perfectly next to our skinny living room tree:
And having the chalkboard sign up top lets us change up the message as we like.
A family monogram would be cute too or any holiday message.
Check out all the virtual party stocking posts below for more inspiration and amazing ideas:
To build the holiday stocking post follow my plans here and be sure to read down below for tips and real life process photos.
1 – 4x4x8 post 5
– 4” wood screws
– 4” wood screws
1 – 2×12 @ 11 ½” board 1” forstner bit
1 – 1” wood dowel wood glue
4 – wood knobs
1 – wood finial
1 – ¾” plywood scrap @ 11” x
1 – 4×4 @ 41” (post)
1 – 2×12 @ 11 ½” (base)
4 – 1” dowel @ 4” (hooks)
1 – 1” dowel @ 15” (sign post)
1 – ¾” plywood @ 11” x 9 1/2” (sign)
In Step 2 use a 1″ forstner bit to drill holes for your dowel pegs. Go about 1″ deep for a secure fit.
To make the peg hooks predrill a hole in one end of the 4″ dowel then use wood glue and screw in the wood knobs until snug.
Generously apply wood glue on the dowel and in the predrilled hole then insert and let dry.
I purposely DID NOT glue the top dowel in place for two reasons 1) it will be much easier to store without the top dowel in place and 2) without the top dowel we can repurpose this post for hats, jackets, etc.
I stained this stocking post using Minwax Early American and then sealed with Minwax Wipe-On Polyureathane in satin finish.
To make the sign draw and 1″ border inset from the plywood edge then paint with chalkboard paint. The stripes are on 45 degree angle and I find a quilting ruler easiest because it’s clear and premarked with various angles. Draw the stripes with a pencil.
Paint the white and red stripes using acrylic craft paint then add a thin green border to finish it off.
The sign is hung using jute rope stapled to the back with a small nail in the post just below the finial.
Disclaimer: The Home Depot partners with bloggers such as me for DIH Workshop program. As part of this program, I received compensation for my time. The Home Depot believes that consumers and bloggers are to form their own opinions and share them in their own words. The Home Depot’s policies align with WOMMA Ethics Code, FTC guidelines and social media engagement recommendations.