Mother’s Day is just around the corner and what a better way to celebrate that new tools!
Cutting a 3/4″ plywood circle is a dream! Look at that smooth cut edge (and no it has not been sanded yet). The Rockwell BladeRunner is controlled, accurate cutting that you cannot get with a jigsaw.
My son recently broke the plastic seat off of this stool snapping the screw anchors. I used the BladeRunner to cut a new 3/4″ wood seat and the results are perfection.
I simply traced the old plastic seat onto 3/4″ plywood and began cutting with the BladeRunner. One note you have to be aware of the arm base (at the orange arrow above), be sure the wood can fit through the opening. Another note be certain the arm is snug and the presser foot is down otherwise you will get a ton of vibration.
Rockwell Tools has thought of everything for the BladeRunner. The sawdust drawer keeps your workspace clean, the miter gauge stores neatly on the side and all the blades are easily accessible:
Speaking of blades, they are super easy and fast to change out depending on which material you are cutting. Yes the BladeRunner will cut wood, metal, plastic and tile! And you can use ANY standard T-shank blade making it easy to replace blades.
Are you thinking you need a BladeRunner now?
Great but you’ll also want the Sonicrafter X2 too after you see what it can do:
The Sonicrafter X2 is the most versitile cutting machine that every DIYer needs in their tool lineup.
All those accessories means the Sonicrafter X2 can cut, saw, scrap, sand, polish and on and on. And switching between the accessories is easier than ever with the hyperlock clamp. One try and you’ll be using the Sonicrafter X2 for every project I guarantee.
Thank you to the kind folks at Rockwell Tools, one lucky US based resident will win one Sonicrafter X2 and BladeRunner.
Happy Mother’s Day!
Disclaimer: I was not compensated for writing this post, all thoughts and opinions are my own.
I was provided product for review.